Specifications
Emitter: 3V Luminus SST40 5000K (DC) 70CRI, mounted on copper DTP MCPCB
3V Cree XHP50.2 6000K (1D) 70CRI, mounted on copper DTP MCPCB
Luminous Flux: SST40: up to 2200 lm
XHP50.2: up to 3500 lm
Intensity: SST40: up to 93000 cd (ANSI throw up to 610 m)
XHP50.2: up to 40000 cd (ANSI throw up to 400 m)
Firmware: Open source software called Andúril, distributed under the terms of the GPL v3.
The source code is available from http://tiny.cc/TKAnduril
Battery: 1x 21700 rechargeable lithium-ion battery(not include)
Battery length must be within 70mm and 72.5mm, diameter below 21.6mm
Protected cells may not fit.
Driver: FET driver with temperature control (see calibration in the UI chart)
Reverse polarity protection, low parasitic drain (< 120 µA)
Charging: USB-C port (input up to 5V 2A)
Reflector: Smooth (SMO) aluminum alloy reflector
Lens: Glass with doubleside anti-reflective coating
Body: Aluminum with hard black anodized or clear coated aluminum alloy
Button: Tactile electronic side switch with back-lit boot
Ingress rating: Equivalent to IPX-8, do not immerse in liquids
Impact resistance: 2 m
Weight: 163 grams without battery
Dimensions: Length: 125.6mm / Head : 44.7mm / Tube : 28.5mm / Tailcap: 29.7mm